Congratulations!! You are the proud owner of the Aquee product.
Aquee products are designed as per international standards to provide trouble free services to its customers.
All the Aquee products, sold in India & abroad, are warranted against any defect in manufacturing or faulty workmanship for the period mentioned below beginning from the date of purchase.
Warranty includes repairing of defective product/part and does not apply to damage resulting from normal wear & tear, abnormal use, abuse, neglect or accident.
*For surface color issues (black, white, gold etc.) and surface galvanic issues (chrome plating, nickel plating, gold plating etc.) the warranty term shall in any case be restricted to 1 year.
This warranty is confined to first purchaser of the product only. Warranty period is validated from date of purchase of the unit and can only be availed if the valid proof of purchase and warranty card is shown to authorized service personnel at the time of repairs. Customers are therefore required to keep original invoice and warranty card safely. Repair or replacement will be carried out by company’s service center or its authorized service associates. For all units installed beyond the municipal beyond the municipal limits of the jurisdiction of the company service center/authorized service associate, the expenses incurred with the regards to deputing the service personnel towards to & fro travel, conveyance and other incidentals will be borne by customer. In the event of repair/replacement of any parts of the units, this warranty will thereafter continue and remain in force only for the un-repaired period of warranty. Moreover, the time taken for repair/ replacement and in transit, whether under the warranty or otherwise shall not be excluded from the warranty period.
The company and its authorized service center reserves the right to retain any parts or components replaced at its discretion in the event of a defect noticed in the product during the warranty period. Company may at its discretion replace the faulty parts with functionally new operative parts. In case of any damage to the product/customer abuse/repairs by un authorized personnel/misuse detected by the authorized service center personnel, the warranty conditions are not applicable and repairs will be done subject to availability of parts and on a chargeable basis only. Replacement of parts would be purely at the discretion of Aquee alone. In case the replacement of the entire unit is being made, (subject to the sole discretion of Aquee), the same model shall be replaced and in the event such model has been discontinued, it shall be replaced with the model of price equivalent at the time of purchase. If any colored internal or external components are replaced, there will be no commitment to ensure that the shades match with the original or other components. The replaced shades, patterns, tints may vary from the customer’s unit due to continuous usage of the unit. Any matching components changed at customer’s request will be on chargeable basis except the component which actually needed.
Damage of any product or parts thereof due to any of the following causes will not be covered under this warranty.
User’s or its agent’s misuse, negligence, accident or faulty installation.
Improper maintenance of the product by not abiding by the aquee printed Instructions Manual/Customer Guidelines.
Dirt, lime-scale or aggressive cleaning chemicals.
Unauthorized alterations to the products.
Normal wear & tear.
While the company will make every effort to carry out repairs at the earliest, it however is made expressly clear that the company is under no obligation to do so in a specified period of time.
This warranty shall not cover any consequential or resulting liability, damage or loss to property or life arising directly or indirectly out of any defect in the Aquee Products. The company’s obligation under this warranty shall be limited to repair or providing replacement of defective parts only the warranty period.
The warranty does not cover demonstration/Installation of the product purchased.
The Warranty does not cover components like Washer, Rubbers, springs and other Plastic Items.
The warranty does not cover accessories external to the product. After completion on one year, in case/s other than manufacturing defects are found in Aquee Products, standard labour and parts charges will be collected from customers, as per prevailing rates of the company.
In case of any dispute, this warranty is subject to jurisdiction of Delhi Courts only.
Proof of purchase, invoice in Original and/or Warranty Card is not shown to company authorized service personnel at the time of repair. In such cases service will still be rendered however it will be on chargeable basis as per the standard rates of labor and/or parts (as the case may be), prevailing at that point of time.
Repair work is carried out by person/agency other than the authorized company personnel or the product is not installed/used according to the instructions given in the instruction/installation manual.
Site conditions, where the product is installed, does not confirm to the recommended operating conditions of Aquee Products.
Defect caused by improper use, as determined by the company authorized service personnel.
Defect caused due to cause beyond control like lightning, acts of God, abnormal water supply/pressure or while in transit from dealer’s outlet to purchaser’s residence.
Damage to the product or any part/s due to transportation or shifting is not covered by warranty.
This warranty will automatically terminate on the expiry of the warranty period even if the product may not be in use for any time during the warranty period for any reason.
For Aquee Products sold in India, only this warranty document is applicable and any reference to any other warranty document will be considered. This is Aquee’s exclusive written warranty.
To ensure uninterrupted pressure of water, it is advisable to keep the pipelines straight with minimum number of bends, which will support smooth flow of water.
All the supply lines must have vent pipes. These vent pipes help in removing air-locking in the water supply to give a smooth flow of water from the fittings.
Use 25 mm pipeline rather than 20 mm which will help in overcoming scaling inside the pipelines and will allow sufficient space for the water to flow.
Prior to plastering or fixing tiles, test the working of all the installed concealed fittings on a high pressure to check for leakage insert, if any.
Clean the aerators provided in the items at regular intervals for a perfect foam of water from the fittings.
Place the outlet point in the overhead tank at least 25 cm above the ground level of the tank. This prevents the flow of foreign particles, sand etc., along with water supply into the fittings and thereby prevents the possible damage to the working parts. Clean the tank thoroughly before the supply starts. It is suggested that the overhead tank must be cleaned at regular intervals to avoid inflow of foreign particles.
Clean the fittings regularly with normal soap or chalk powder to remove scaling or stains. Do not use strong detergents as this may cause Do not use harsh cleaning agents containing abrasives and acid. Instead, us a soft sponge or wet cloth with soapy water or diluted vinegar to protect the colour coated finish.
To protect the fine finish of fittings from dirt, stains and other damages during construction, cover them with cloth or polypack after their installation, till they come into actual use.
It is suggested that centre to centre distance from Hot & Cold inlet for all types of wall mounted mixtures should be maintained at 150+/-10 mm where any of our wall mixers from different ranges can be easily installed without any problem.
Buy HSIL products from company’s Authorized Dealers only to ensure genuine quality material.
Insist on genuine spares from company’s Local Service Centre or its Authorised Stocklist in case of any repair or replacement.
Please strictly follow the instructions manual provided for individual items in their packing boxes for their correct installation or maintenance.
Look for Aquee logo on all HSIL Products.
For any type of technical or service assistance, Please contact the nearest HSIL branch Office, Area Representative or Dealer. In all Showers & Health Faucets, a sieve is provided to prevent dirt and foreign particles. The Presence of this sieve must be ensured during installation.
In case of conflict of opinion, the final decision should be vested with aquee faucet.